Water Hardness in Texas — Typical gpg Levels & Cities

Quick answer

Texas's public water typically runs 4 to 20 grains per gallon (70–342 mg/L) — very hard water on the USGS scale, driven by local geology and water source. A family of four on water at the typical midpoint (12 gpg) needs roughly a 34k-grain softener — run your own numbers with the size calculator.

How hard is Texas water?

Texas spans both hardness worlds: Central and South Texas draw from limestone Edwards/Trinity aquifers that yield very hard water (San Antonio 15-20 gpg), while East Texas cities rely on surface reservoirs (Trinity/San Jacinto rivers, Highland Lakes) that are only moderately hard - Austin further lime-softens its supply to about 5 gpg.

City water hardness samples (Texas)

City figures are point-in-time samples from utility publications (annual water quality reports) — hardness drifts seasonally and with source blending, so treat them as strong context rather than a substitute for testing your own tap.

What this means for softener sizing

Sizing on the typical range: at 4 gpg a four-person household lands in the 11k tier; at 20 gpg the same household wants 56k. That spread is the difference between one tier and two — which is why a zip-code guess is a starting point, not a sizing input. Get your hardness tested (or find your utility's published number), add +4 gpg per ppm of iron if you're on a well, then use the size calculator — it maps your actual number onto the market tiers directly. The hardness scale explains the classes; the sizing chart shows every household × hardness combination.

Getting your exact number in Texas

Three routes, fastest first: (1) your utility's annual Consumer Confidence Report — most Texas systems publish it online, and those that state hardness list it in mg/L (divide by 17.1 for grains); (2) a $10 strip test at the kitchen tap — good to ±2–3 gpg, which is usually enough to pick a tier; (3) a lab kit — worth it on private wells, where iron rides along with hardness and changes the sizing math more than most homeowners expect. Private-well owners in Texas should test hardness and iron in the same draw: the compensation rule (+4 gpg per ppm iron) frequently moves a household a full market tier up.

Neighborhood hardness varies inside Texas

Statewide ranges compress enormous local spread. Utilities that draw from different aquifers or blend surface and ground sources can differ by a hardness class across town lines, and the sampled cities above are living proof — Austin, Dallas, Houston sit at measurably different points. Seasonal shifts matter too: reservoir turnover and dry-year concentration move hardness by a few gpg within the same tap. Treat every figure on this page as context; the number that sizes your softener is the one from your own tap.

Sources

• USGS Water Science School - Hardness of Water (classification + 1975 NASQAN map) — usgs
• Austin Water - Annual Water Quality Report (CCR) — utility
• San Antonio Water System - Water Quality FAQs — utility
• City of Dallas Water Utilities - 2002 Drinking Water Quality Report (PDF) — utility
• Houston Public Works - 2025 Water Quality Report (PDF) — utility